DSpace logo

Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utmachala.edu.ec/handle/48000/17467
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorChabla Carrillo, Julio Enrique-
dc.contributor.authorCastro Guevara, Victor Bismark-
dc.date.accessioned2021-10-10T15:29:12Z-
dc.date.available2021-10-10T15:29:12Z-
dc.date.issued2021-
dc.identifier.citationCastro Guevara, V.B. (2021) Efecto del fertirriego y fertilización edafica en la producción de banano,cantón pasaje-provincia el oro (trabajo de titulación). UTMACH, Unidad Académica de Ciencias Agropecuarias, Machala, Ecuador.es_ES
dc.identifier.otherTTUACA-2021-IA-DE00049-
dc.identifier.urihttp://repositorio.utmachala.edu.ec/handle/48000/17467-
dc.descriptionLa nutrición de los cultivos es pilar fundamental en la producción agrícola, en ocasiones se efectúan fertilizaciones sin considerar las condiciones químicas del suelo y los requerimientos de la planta lo que conlleva a una disminución del rendimiento y aumentar los costos de producción. La fertilización edáfica, una de las prácticas más utilizadas en la producción, combina dos factores importantes durante la fase de crecimiento y desarrollo de los cultivos: la nutrición eficiente y el manejo de láminas de agua en las diversas fases de desarrollo del cultivo, su manejo adecuado permitiría lograr alto rendimiento y calidad en las cosechas. Actualmente con el fin de optimizar la nutrición del banano así como aumentar el uso eficiente del riego se proyectó utilizar un sistema de fertirriego que además de optimizar el uso de los fertilizantes y el agua, especialmente en aquellas zonas donde el recurso hídrico comienza a limitarse, es una técnica susceptible de aplicarse en una amplia gama de situaciones ,tanto por las propias características fisiológicas de los cultivos , como las características físicos químicas del suelo y del agua .El presente trabajo de investigación se realizó en una finca bananera planteándose el siguiente objetivo, evaluar el efecto de 3 tipos de fertilización: Fertirriego, fertilización edáfica y la fertilización edáfica-fertirriego a través de sus variables biométricas y su impacto en la producción bananera, el diseño experimental que se utilizó fue bloques completos al azar. Los Bloques fueron constituidos por áreas compactas en la finca y dentro de cada bloque estaban los diversos tratamientos de las unidades experimentales. Se implementó 3 tratamientos de sistemas de aplicación de fertilizante: T1=Fertirriego, T2= Edáfico, T3= Fertirriego + Edáfico y T4=Testigo en un área 0,9 ha. Las variables evaluadas fueron: Emisión foliar (V1-EF), Altura del hijo a la cosecha (V2-AH), Diámetro de fuste (V3-FUST), Peso de racimo (V4-PRM), Peso de raquis (V5-PRQ),Número de manos por racimo (V6-NM), Número de dedos de mano de sol (V7-NDMS),Número de dedos de última mano (V8-NDUM), El análisis estadístico se realizó empleando el software IBM SPSS Estatistics 21, se realizó un análisis exploratorio de los datos , mediante gráfico de cajas y bigotes, posterior un ANOVA Factorial intergrupos denotando así, que los datos para cada variable medida tuvo diferencias significativas, demás que los tipos de fertilizaciones influyeron en las medias de las variables medidas, se realizó una prueba post-hoc tukey para determinar el mejor tratamiento y establecer si las diferencias entre ellos son o no significativas, de acuerdo a los resultados obtenidos. La investigación determinó que el tratamiento T1-fertirriego y una fertilización combinada T3-fertirriego+edafico, la emisión foliar obtuvo una similar distribución de sus medias de 0.8 hojas por semana, estableciendo diferencias con los demás tratamientos. La altura del hijo tuvo una diferencia significativa entre los tratamientos del fertirriego y una fertilización combinada de fertirriego+edáfico, es decir no tuvieron una similar distribución de sus medias, las cuales fueron de 2.191 metros y 1.968 metros respectivamente, determinando que el fertirriego causó un mayor efecto en la variable. En la media de fuste por cada tratamiento existen diferencias significativas entre la implementación del fertirriego y fertirriego+edáfico, es decir no tuvieron una similar distribución de sus medias, pues se obtuvo un diámetro de fuste del banano de 36,047 y 32,798 centímetros. La variable peso del racimo presentó diferencias significativas entre la implementación del fertirriego y la fertilización combinada de fertirriego-fertilización edáfica; es decir, no tuvieron una similar distribución de sus medias, obteniendo medias de peso de racimo de banano de 73,421 y 68,752 libras respectivamente. Finalmente se puede señalar que el fertirriego fue el tratamiento que dio los mejores resultados en todas las variables biométricas consideradas y por lo tanto la mayor producción.es_ES
dc.description.abstractCrop nutrition is a fundamental pillar in agricultural production. Sometimes fertilization is carried out without considering the chemical conditions of the soil and the plant's requirements, which leads to a decrease in yield and increases production costs. Edaphic fertilization, one of the most widely used practices in production, combines two important factors during the growth and development phase of crops: efficient nutrition and the management of water sheets in the various stages of crop development. Currently, in order to optimize banana nutrition and increase the efficient use of irrigarían, a fertigation system was designed to optimize the use of fertilizers and water, especially in areas where water resources are beginning to be limited. This technique can be applied in a wide range of situations, both for the physiological characteristics of the crops themselves, as well as the physical and chemical characteristics of the soil and water. The present research work was carried out in a banana farm with the following objective: to evaluate the effect of 3 types of fertilization: Fertigation, edaphic fertilization and edaphic-fertigation fertilization through their biometric variables and their impact on banana production, the experimental design used was randomized complete blocks. The blocks were constituted by compact areas in the farm and within each block were the different treatments of the experimental units. Three treatments of fertilizer application systems were implemented: T1= Fertigation, T2= Edaphic, T3= Fertigation + Edaphic and T4=Testing in an area of 0.9 ha. The variables evaluated were: Leaf emission (V1-EF), Son height at harvest (V2-AH), Stem diameter (V3-FUST), Cluster weight (V4-PRM), Rachis weight (V5-PRQ),Number of hands per cluster (V6-NM), Number of sun hand fingers (V7-NDMS), Number of fingers of last hand (V8-NDUM), Statistical analysis was performed using IBM SPSS Statistics 21 software, an exploratory analysis of the data was performed, An exploratory analysis of the data was carried out using box and whisker plots, followed by an intergroup Factorial ANOVA, showing that the data for each variable measured had significant differences, and that the types of fertilization influenced the means of the variables measured. A post-hoc tukey test was carried out to determine the best treatment and to establish whether the differences between them are significant or not, according to the results obtained. The research determined that the treatment T1-fertigation and a combined fertilization T3-fertigation+edaphic, the leaf emission obtained a similar distribution of their means of 0.8 leaves per week, establishing differences with the other treatments. The height of the son had a significant difference between the treatments of fertigation and a combined fertilization of fertigation + edaphic, that is, they did not have a similar distribution of their means, which were 2.191 meters and 1.968 meters respectively, determining that fertigation caused a greater effect on the variable. In the stem mean for each treatment, there are significant differences between the implementation of fertigation and fertigation + edaphic, that is to say they did not have a similar distribution of their means, since a stem diameter of 36.047 and 32.798 centimeters was obtained. The bunch weight variable presented significant differences between the implementation of fertigation and the combined fertilization of fertigation-fertilization-edaphic fertilization; that is, they did not have a similar distribution of their means, obtaining banana bunch weight means of 73.421 and 68.752 pounds, respectively. Finally, it can be pointed out that fertigation was the treatment that gave the best results in all the biometric variables considered and therefore the highest production.es_ES
dc.format.extent69 p.es_ES
dc.language.isoeses_ES
dc.publisherMachala : Universidad Técnica de Machalaes_ES
dc.rightsopenAccesses_ES
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectFERTIRRIEGOes_ES
dc.subjectINYECCIÓNes_ES
dc.subjectFERTILIZACIÓNes_ES
dc.subjectEDIFICAes_ES
dc.titleEfecto del fertirriego y fertilización edafica en la producción de banano,cantón pasaje-provincia el oroes_ES
dc.typeTrabajo Titulaciónes_ES
dc.emailvcastro3@utmachala.edu.eces_ES
dc.cedula0705443232es_ES
dc.utmachtitulacion.titulacionTrabajo experimentales_ES
dc.utmacharea.areaconocimientoN/Aes_ES
dc.utmachbibliotecario.bibliotecarioSanchez Pilares_ES
dc.utmachproceso.procesoPT-170521 (2021-1)es_ES
Aparece en las colecciones: Trabajo de Titulación Ingeniería Agronómica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TTUACA-2021-IA-DE00049.pdfDescripción bibliográfica del trabajo de titulación3,1 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons