DSpace logo

Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utmachala.edu.ec/handle/48000/11599
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorSánchez Mendieta, Carlos Eugenio-
dc.contributor.authorMite Bedoya, Alexander Wilfrido-
dc.date.accessioned2017-09-27T19:43:56Z-
dc.date.available2017-09-27T19:43:56Z-
dc.date.issued2017-09-04-
dc.identifier.citationMite Bedoya, A.W. (2017) Tratamiento de aguas residuales mediante sistema de zanjas de filtro y filtros subsuperficiales de arena para pequeñas redes de abastecimiento (trabajo de titulación). UTMACH, Unidad Académica de Ingeniería Civil, Machala, Ecuador. 72 p.es_ES
dc.identifier.otherTTUAIC_2017_IC_CD0009-
dc.identifier.urihttp://repositorio.utmachala.edu.ec/handle/48000/11599-
dc.descriptionThe present work identifies the problem of contamination and diseases caused by the direct discharge of sewage to adjacent channels and the use of blind wells in Miraflores Site. The research was carried out between May and August of 2017, with the objective of elaborating an alternative of wastewater treatment design by means of filter trenches and subsurface sand filters for small supply networks at the Miraflores site Parish of Bellavista. A pre-feasibility study was carried out investigating all the current alternatives for wastewater treatment and choosing the alternative that meets the socioeconomic, topographical and soil conditions of the site. For the soil studies the first to perform were the infiltration tests in situ, which consisted of performing gauges at different depths, 30 m apart, the first one was done in the first layer discarding the organic soil, for that the calicata had Dimensions of 0.80 by 0.80 m inside this one were elaborated cylinder of 0.30 m of diameter by 0.30 m of depth, to these cylinders were placed 5 cm of gravel and they were filled in 66% with water during a period of 24 hours, This saturation made it possible to simulate the operating conditions of the treatment plant. After 24 hours, the water was taken every half hour for a period of 3 hours. The procedure was repeated for the remaining gauges. Different depths where the different strata are located. The second was the extraction of soil samples for analysis in the laboratory, for which moisture content tests and Atterberg boundaries were performed, followed by the results obtained to classify the soil using the unified soil classification system (SUCS) . Laboratory tests classified the first stratum in OL - ML, the second stratum was classified as CH, and the third stratum was classified as OH - MH. The results obtained from the in situ infiltration tests determined the presence of completely impermeable strata, since they completely prevent the passage of water through them, which is why it was proposed the implementation of subsurface sand filters with drainage systems. These filters consist of 75% sand, 25% gravel and at the top the placement of a geotextile that allows the evaporation of the waste water and retains fines that can enter from the filling material to the filter, the design is Complemented with a drainage system in order to direct the effluent to the nearest receiving body. In the proposed design, the dimensions of the subsurface filters were increased in order to efficiently distribute and collect the wastewater, this design allowed to comply with the availability of existing land in the study area, since the entire plant occupies 2434.00 m2, a saving of 50% of land compared to the design of filter trenches, which generates savings in the implementation of different structures and in the overall cost of the treatment plant.es_ES
dc.description.abstractEl presente trabajo identifico la problemática de la contaminación y enfermedades producto de la descarga directa de aguas servidas a canales adyacentes y a la utilización de pozos ciegos en viviendas del Sitio Miraflores. La investigación se realizó entre los meses de Mayo y Agosto del 2017, con el objetivo de elaborar una alternativa de diseño de tratamiento de aguas residuales mediante sistema de zanjas de filtro y filtros subsuperficiales de arena para pequeñas redes de abastecimiento en el sitio Miraflores de la parroquia Bellavista. Se realizo un estudio de prefactibilidad investigando todas las alternativas actuales para el tratamiento de aguas servidas y escoger la alternativa que cumpla con las condiciones socioeconómicas, topográficas y de suelos del sitio. Para los estudios de suelos los primero en realizar fueron las pruebas de infiltración in situ, las cuales consistían en realizar calicatas a distintas profundidades separadas entre ellas 30 m, la primera se realizaba en el primer estrato descartando la tierra orgánica, para ello la calicata tenía unas dimensiones de 0.80 por 0.80 m dentro de esta se elaboraban cilindro de 0.30 m de diámetro por 0.30 m de profundidad, a estos cilindros se les colocaba 5 cm de grava y se llenaban en un 66% con agua durante un periodo de 24 horas, esta saturación permitió simular las condiciones de operación de la planta de tratamiento, luego de transcurrir las 24 horas se procedía a tomar lecturas de descenso del agua cada media hora por un periodo de 3 horas, el procedimiento se repitió para las restantes calicatas, pero a distintas profundidades donde se localicen los distintos estratos. Lo segundo fue la extracción de muestras de suelos para su análisis en laboratorio, para lo que se realizaron pruebas de contenido de humedad y límites de Atterberg, para luego con los resultados obtenidos clasificar al suelo mediante el sistema unificado de clasificación de suelos (SUCS). Los ensayos de laboratorio clasificaron al primer estrato en OL – ML, el segundo estrato se clasifico como CH, y al tercer estrato se clasifico como OH – MH. Los resultados obtenidos de las pruebas de infiltración in situ determinaron la presencia de estratos completamente impermeables ya que impiden completamente el paso de agua a través de estos, es por lo que se propuso la implementación de filtros subsuperficiales de arena con sistemas de drenaje. Estos filtros están constituidos en un 75 % de arena, un 25 % de grava y en su parte superior la colocación de un geotextil que permite la evaporación del agua servida y retiene finos que pueden ingresar desde el material de relleno al filtro, el diseño se complementó con un sistema de drenaje para poder dirigir el efluente hacia el cuerpo receptor más cercano. En el diseño propuesto se aumentó las dimensiones de los filtros subsuperficiales para poder distribuir y recolectar eficientemente las aguas servidas, este diseño permitió cumplir con la disponibilidad de terreno existente en el área de estudio, ya que la planta completa ocupa 2434.00 m2, un ahorro del 50% de terreno en comparación con el diseño de zanjas filtro, lo que genera un ahorro en implantación de distintas estructuras y en el costo general de la planta de tratamiento.es_ES
dc.format.extent72 p.es_ES
dc.language.isoeses_ES
dc.publisherMachalaes_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectINFILTRACIÓN, TRATAMIENTOes_ES
dc.subjectZANJAS DE ARENA, FILTROS SUBSUPERFICIALES.es_ES
dc.titleTratamiento de aguas residuales mediante sistema de zanjas de filtro y filtros subsuperficiales de arena para pequeñas redes de abastecimientoes_ES
dc.typebachelorThesises_ES
dc.emailamite_est@utmachala.edu.eces_ES
dc.cedula0706285426es_ES
dc.utmachtitulacion.titulacionProyecto técnicoes_ES
dc.utmacharea.areaconocimientoIngeniería, Industria y Construcciónes_ES
Aparece en las colecciones: Trabajo de Titulación Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TTUAIC_2017_IC_CD0009.pdf6,97 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons